人工调水回灌和海绵城市促渗补给地下水方案比较

随着城市化快速发展和城市人口急剧增加,城市需水量急剧增加,导致许多城市地下水被过量开采。与此同时,随着城市建设用地的增加,不透水面积比例逐年升高,阻断了雨水下渗通道,导致地下水补给量逐年减小。地下水资源的过量开采引起了地面不均匀沉降、地下水污染、海水入侵等一系列问题。针对上述问题,以某市为例,从水量、水质、工程可靠性等方面比较了人工调水回灌与海绵城市促渗补给地下水方案的综合效益。结果表明:人工调水方案地下水补给量约为779万m3/年,海绵城市建设方案地下水补给量为339万m3/年,2种方案补给水水质中污染物种类相似,但雨水径流污染物浓度波动较大。因此,人工调水具有补水量易于控制、水质相对稳定,但调水水量受可利用水源的制约。海绵城市建设在保证地下水补给效果的同时,还具有雨水径流污染控制、洪涝缓解等多重效益,综合效益相对较高,且更符合城市可持续发展的理念。     

除Cd (Ⅱ)重金属吸附剂——巯基乙酰化玉米秸秆的制备

以玉米秸秆（CS）、巯基乙酸（TGA）为原料,通过化学反应制备出重金属吸附剂——巯基乙酰化玉米秸秆（MACS）,考察MACS对水样中Cd （Ⅱ）的去除性能,采用单因素实验法对MACS的制备条件进行优化研究。结果表明,MACS的优化制备条件为:CS粒径为0.20 mm （80目）,m（催化剂NHS）:m（EDC·HCl）为0.5:1,m（CS）:V（TGA）为1:5,反应介质pH值为5.0,反应温度25℃,反应时间2 h。在此条件下制备的MACS对水样中Cd （Ⅱ）的吸附效率可达到61.57%。红外分析表明,CS分子链中成功引入了巯基。     

建筑垃圾堆放点样本集构建与优化研究

为更好地解决手工制作的建筑垃圾堆放点样本集效率低、数据量少,难以支撑基于深度学习的遥感图像目标检测算法训练需求的问题,采用基于像素的遥感分类方法构建建筑垃圾堆放点样本集,在此基础上结合直方图均衡化,CS-LBP算子约束以及迁移学习的方法对Wasserstein生成对抗模型（WGAN）进行优化,实现了样本集扩充。研究结果表明:相对于纯手工制作的样本集,基于像素的遥感分类方法可以显著提升样本集制作的效率;同时,经过WGAN优化后,生成样本模拟了原始数据的颜色与纹理特征分布规律,增加了原始数据的多样性,满足了扩充样本集的需求。     

Chemical characteristics of road dust PM2.5 fraction in oasis cities at the margin of Tarim Basin

In order to understand the compositions characteristics of particulate matter with aerodynamic diameter less than 2.5 μm (PM_2.5) fraction in road dust (RD_2.5) of oasis cities on the edge of Tarim Basin, 30 road dust (RD) samples were collected in Kashi, Cele, and Yutian in the spring, 2018, and RD_2.5 was collected using the resuspension approach. Eight water-soluble ions, 39 trace elements and 8 fractions of carbon-containing species in PM_2.5 were analyzed. Ca²⁺ and Ca were the most abundant ions and elements in RD_2.5 (7.1% and 9.5%). Cl^- in RD_2.5 was affected not only by attributed to saline-alkali soils in oasis cities of the Tarim Basin and dust from Taklimakan Desert but also by human activities. Moreover, the organic carbon/elemental carbon (OC/EC) ratio indicated that carbon components in RD_2.5 in Cele town mainly come from fossil fuel combustion, while those in Yutian and Kashi mainly come from biomass combustion. It is noteworthy that high Ca in RD_2.5 was seriously affected by anthropogenic emissions, and high Na and K contents in RD_2.5 could be derived from soil and desert dust. It was estimated that Cd, Tl, Sn and Cr were emitted from anthropogenic emissions using the enrichment factor. The coefficients of divergence (COD) result indicated that the influence of local emission on road dust emission is greater than that of long-distance transmission. This study is the first time to comprehensively analyze the chemical characteristics of road dust in oasis cities, and the results provides the sources of road dust at the margin of Tarim Basin.     

Investigation to meet China II emission legislation for marine diesel engine with diesel methanol compound combustion technology

In order to reduce the pollutant emission and alleviate the pressure of petroleum resources shortage and greenhouse gas emission at the same time, the use of clean and renewable alternative fuel for marine engines is a promising option. In this study, a marine diesel engine, which was modified to run in diesel methanol compound combustion (DMCC) mode, was investigated. After the diesel injection parameters were calibrated, and combined with a sample after-treatment device DOC (diesel oxidation catalyst), the engine could meet the requirements of China II legislation. The overall MSP (methanol substitute percent) reached 54.1%. The value of each pollutant emission was much lower than that in China II emission legislation, and there was almost no methanol and formaldehyde emissions. When methanol was injected into the inlet manifold, the intake air temperature decreased a lot, as well as the exhaust gas temperature, which were beneficial to increase engine thermal efficiency and improve engine room environment. Compared with the engine running in pure diesel mode, when the engine ran in diesel/methanol dual fuel mode, the combustion phase was advanced, and the combustion duration became shorter. Therefore, the engine thermal efficiency increased, and fuel consumption decreased significantly.     

水力空化-酸化调理增强污泥脱水性能分析

研究了水力空化-酸化调理作用于污泥脱水的机理。以污泥比阻（specific resistance to filtration,SRF）、污泥含水率和污泥毛细吸水时间（capillary sunction time,CST）作为主要的评价指标,测定污泥胞外聚合物（extracellular polymeric substances,EPS）中多糖、蛋白含量并进行了污泥酸化程度、污泥电子显微图像分析。结果表明:经水力空化-酸化调理污泥,污泥含水率和SRF分别从83.1%和5.12×1011 m/kg下降到69.8%和2.41×1011 m/kg,CST由50 s下降至20.8 s,各EPS组分含量下降明显,酸化作用通过影响污泥的溶解型胞外聚合物（S-EPS）和松散结合型胞外聚合物（LB-EPS）中的多糖及蛋白含量改变污泥的脱水性,pH=3时污泥脱水效果最好。综上所述,水力空化-酸化调理能大大增强污泥的脱水性能,在实际工程中具有很大的应用价值。     

生物气溶胶的吸湿性

归纳了有关气溶胶吸湿性的测量方法以及过去近30a来文献中报道的生物气溶胶吸湿性的主要研究成果,总结了不同种类生物气溶胶之间吸湿性的差异.已有研究表明,绝大部分的生物气溶胶粒子都具有一定的吸湿性,当相对湿度为90%时,吸湿增长因子约为1.04（真菌孢子）~1.22（细菌）,花粉颗粒物吸湿后的质量与之前的比值为1.30~1.55.最后,提出了目前关于生物气溶胶吸湿性研究中尚未解决的科学问题及该领域的主要发展方向.     

生物炭吸附水中磷酸盐的研究进展

生物炭作为1种环境友好型吸附材料,可有效去除并回收水体中的磷,由此也成为当前的研究热点之一。综述了目前国内外生物炭吸附磷酸盐及磷素回收研究现状,主要总结了控制生物炭吸附磷酸盐的4种主要机制,阐述了影响生物炭吸附除磷过程中的主要影响因素,介绍了目前应用研究的方向并提出生物炭在实际应用中所面临的问题并对未来研究方向进行了展望,以期为未来研究及推广应用提供理论支撑。     

2-丁烯醛生产废水的臭氧脱毒预处理

CMW（crotonaldehyde manufacturing wastewater,2-丁烯醛生产废水）污染物浓度高、毒性强、直接采用生物法处理难度大.为了降低CMW的生物处理毒性,采用臭氧氧化法对CMW进行脱毒预处理,并通过考察不同臭氧氧化条件对废水COD_Cr、TOC（总有机碳）、UV_{254 nm}去除率及SMA（specific methanogenic activity,比产甲烷活性）抑制率的影响,获得了优化的臭氧氧化条件,进一步分析了废水脱毒机理.结果表明:①优化的臭氧氧化条件为接触反应时间180 min、初始pH 3.0、反应温度35℃、气相臭氧浓度30.3 mg/L,进气流量500 mL/min;并且在该条件下,CMW中COD_Cr、TOC和UV_{254 nm}的去除率分别为19.9%、9.9%和70.6%,主要特征有机污染物[包括2-丁烯醛、（E,E）-2,4-己二烯醛、3-（2-甲基-2-丙烯）-5-戊内酯、1,5-二甲基-1-烯-4-羰基-环氧己烷、山梨酸乙酯等]的去除率在74.4%以上.②厌氧产甲烷毒性试验结果显示,CMW的SMA抑制率由臭氧氧化前的82.0%降至臭氧氧化后的47.2%.③反应动力学研究显示,CMW中COD_Cr、TOC及UV_{254 nm}的去除过程均符合一级反应动力学方程,R2分别为0.82、0.97、0.94.研究显示,臭氧氧化预处理可以较好地去除CMW中的特征有机污染物,降低废水的厌氧生物处理毒性,是一种可行的脱毒预处理方法.      

典型脱硫工艺对燃煤锅炉烟气颗粒物的影响

脱硫是燃煤锅炉的重要除污环节,为探究脱硫工艺对烟气颗粒物的影响,选取4台不同脱硫工艺（石灰石/石膏法、炉内喷钙法、氨法和双碱法）的燃煤锅炉,利用再悬浮采样法和稀释通道采样法分别采集脱硫前后烟气颗粒物样品,并测定颗粒物中的水溶性离子、无机元素和碳组分.结果表明,脱硫剂对烟气PM_2.5的组分构成产生影响,烟气经过石灰石/石膏法脱硫后,PM_2.5中的Ca由5.1%提高至24.8%;经过氨法脱硫后,PM_2.5中NH₄⁺的质量分数由0.8%提高到7.3%;双碱法脱硫则使烟气PM_2.5中Na由0.9%提高到1.7%.湿法和干法脱硫工艺的作用显著不同,湿法脱硫排放颗粒物的离子含量较高,经过石灰石/石膏法和氨法脱硫,PM_2.5中SO₄^2-的质量分数分别由2.0%和6.7%提高到9.6%和11.9%,Cl^-分别由0.4%和1.2%提高到3.8%和5.2%,而Cr、Pb、Cu、Ti和Mn等重金属经过湿法脱硫出现含量下降;相对湿法脱硫,干法脱硫燃煤锅炉排放的PM_2.5中富含Al、Si和Fe等地壳元素.湿法脱硫同样对碳组分产生影响,石灰石/石膏法和氨法脱硫后,烟气PM_2.5的元素碳EC质量分数分别从6.1%降至0.9%和从3.6%降至0.7%,但是有机碳OC的含量并没有下降.